• Create BookmarkCreate Bookmark
  • Create Note or TagCreate Note or Tag
  • PrintPrint
Share this Page URL
Help

Lesson 6. QuickPaint > Stroke Modes

Stroke Modes

You can use three different stroke modes while painting: Frame, Interpolate, and Persist. You will use these different modes throughout the course of this lesson.

  • Frame mode toggle

    When you paint in this mode, you are painting only on the current frame.

  • Interp toggle

    When in this mode, you can interpolate your brush strokes. Go to frame 1 and paint a stroke. Now go to, say, frame 20 and paint. When you drag back between 1 and 20 on the Time Bar, the stroke interpolates. If you go beyond frame 20 or before frame 1, the image is black. To insert a second interpolation stroke, toggle through the Interp toggle until you hit Interp again and use the strokeIndex slider to select the stroke you want to modify.

  • Persist toggle

    This means the stroke persists from frame to frame. You can change it by going into Edit mode and animating it, but otherwise it will not change.


PREVIEW

                                                                          

Not a subscriber?

Start A Free Trial


  
  • Creative Edge
  • Create BookmarkCreate Bookmark
  • Create Note or TagCreate Note or Tag
  • PrintPrint