• Create BookmarkCreate Bookmark
  • Create Note or TagCreate Note or Tag
  • PrintPrint
Share this Page URL
Help

Chapter 7. Direct-to-DVD Recording > Selecting Capture Settings

Selecting Capture Settings

If you've connected a single FireWire device, MyDVD will automatically recognize it as a source, and you can skip this section—it's possible, however, that you have either connected an analog device or you have multiple sources connected to your PC. If so, you must select the video and audio devices that Windows will use as the source for your recording. Note that you must have already successfully installed the capture device within Windows, or the connection won't show up during this procedure.

tip

It's very important to keep your capture hardware updated with the latest Windows drivers—check the capture hardware manufacturer's Web site at least once a month. Current drivers will go a long way toward assuring trouble-free operation—that applies to all of your PC's components!



PREVIEW

                                                                          

Not a subscriber?

Start A Free Trial


  
  • Creative Edge
  • Create BookmarkCreate Bookmark
  • Create Note or TagCreate Note or Tag
  • PrintPrint