• Create BookmarkCreate Bookmark
  • Create Note or TagCreate Note or Tag
  • PrintPrint
Share this Page URL
Help

Chapter 15. Creating and Editing Digital... > Setting Up Video Hardware

Setting Up Video Hardware

Attaching digital imaging devices to a Windows Me computer involves the following steps:

  1. Check your screen resolution and color depth and reset them to achieve 24-bit (16.8 million colors) at your preferred resolution (800×600 or higher, depending on your monitor size).

  2. Verify that the correct interface for your preferred device is installed.

  3. Physically install the correct interface if it isn't present.

  4. Install the software drivers for each interface.

  5. Install the drivers for the device.

  6. Physically connect the device to your computer.


PREVIEW

                                                                          

Not a subscriber?

Start A Free Trial


  
  • Creative Edge
  • Create BookmarkCreate Bookmark
  • Create Note or TagCreate Note or Tag
  • PrintPrint