Share this Page URL

Your First Subtractor Patch > Setting Up a Start Point - Pg. 213

Let's begin with LFO 1. 1. 2. 3. 4. 5. Activate the Sync button to synchronize LFO 1 to the tempo of your Reason song. Set the Rate knob to a value of 1/8. This will cause the Filter Frequency to modulate on every 8th note. Set the Amount knob to a low value of 12. You will still hear the effect of the LFO, but it will not become too dominant in the patch. Set the Destination mode to F.Freq or Filter Frequency. Note that as you are using both filters, the LFO will modulate both Frequency Filter sliders. Select the Square Waveform from the waveform mode. This will produce an abrupt modulation between the maximum and minimal potential of the square waveform that will sound great when synced to tempo. Next, let's introduce LFO 2 and have it modulate the phase of Oscillators 1 and 2. 1. 2. 3. 4. Set the Destination mode of LFO 2 to Phase. Set the Rate knob to a value of 30. Set the Amount knob to a high amount of 90. Set the Keyboard Tracking to 100. ADD A DASH OF VELOCITY In this tutorial, you're not making much use of the Velocity section, so I want to